Danfoss VLT AutomationDrive FC 302, Инструкция по эксплуатации

Страница: 143 / 174

No. Description Warning Alarm/Trip Alarm/Trip Lock Parameter Reference
309 Power ground fault X X
311 Switch. freq. limit X
312 CT range X
314 Auto CT interrupt X
315 Auto CT error X
316 CT location error X
317 CT polarity error X
318 CT ratio error X
Table 9.3 Alarm/Warning Code List
A trip is the action when an alarm has appeared. The trip coasts the motor and can be reset by pressing [Reset] or make a
reset by a digital input (parameter group
5-1* Digital Inputs [1] Reset ). The original event that caused an alarm cannot
damage the adjustable frequency drive or cause dangerous conditions. A trip lock is an action that occurs in conjunction
with an alarm, which may cause damage to the adjustable frequency drive or connected parts. A trip lock situation can only
be reset by power cycling.
LED indication
Warning yellow
Alarm flashing red
Trip locked yellow and red
Table 9.4 LED Indicator Lights
Warnings and Alarms Instruction Manual
MG37A222 Danfoss A/S © Rev. 2014-02-07 All rights reserved. 141
9 9