Sleep Mode
The energy saving function is enabled. The
motor has stopped but restarts automatically
when required.
Speed high
Motor speed is above the value set in
4-53 Warning Speed High
.
Speed low
Motor speed is below the value set in
4-52 Warning Speed Low
.
Standby
In Auto On mode, the adjustable frequency
drive starts the motor with a start signal from
a digital input or serial communication.
Start delay
In
1-71 Start Delay
, a delay starting time was
set. A start command is activated and the
motor will start after the start delay time
expires.
Start fwd/rev
Start forward and start reverse were selected
as functions for two different digital inputs
(parameter group
5-1* Digital Inputs
). The
motor starts in forward or reverse depending
on which corresponding terminal is activated.
Stop
The adjustable frequency drive has received a
stop command from the LCP, digital input, or
serial communication.
Trip
An alarm occurred and the motor is stopped.
Once the cause of the alarm is cleared, the
adjustable frequency drive can be reset
manually by pressing [Reset] or remotely by
control terminals or serial communication.
Trip lock
An alarm occurred and the motor is stopped.
Once the cause of the alarm is cleared, power
must be cycled to the adjustable frequency
drive. The adjustable frequency drive can then
be reset manually by pressing [Reset] or
remotely by control terminals or serial
communication.
Table 8.3 Operation Status
NOTICE!
In auto/remote mode, the adjustable frequency drive
requires external commands to execute functions.
Status Messages
Instruction Manual
128
Danfoss A/S © Rev. 2014-02-07 All rights reserved.
MG37A222
8
8
Содержание VLT AutomationDrive FC 302
Страница 2: ......
