VLT® Software Customizer
VLT® Software Customizer allows you
to customize the commissioning
experience to best fit your needs. It is
a tool that enables you to simply and
quickly create and test your desired
setup using the simulator before
uploading it to a real drive.
The VLT® Software Customizer consists
of three main features:
SplashScreen
allows you to create
a custom splash screen for when the
drive starts up. You can use the built-
in editor to create an image from
blank or import an existing image
from a library or from your computer
and adapt it to the VLT®.
InitialValues
allows you to set a
new default value for virtually any
parameter.
SmartStart
allows you to create
a custom start-up wizard to go
through exactly the parameters you
need.
The VLT® Motion Control Tool MCT 10
is an interactive tool for quick and easy
online/offline configuration of a VLT®
drive or soft starter using a PC. You
can also use the tool to configure the
communication network and to back
up all your relevant parameter settings.
With MCT 10, you can control and
configure your system simultaneously
and monitor your entire system more
effectively for faster monitoring,
diagnosis, troubleshooting (alarms/
warnings) and better preventive
maintenance. Starting with version
4.00, MCT 10 includes even more
features that enhance usability.
Status plug-in
The readouts for various status and
control words, relay inputs and outputs
that are available over the fieldbus
have been greatly improved. We have
combined these signals into a single
plug-in that shows you much more
information. You’ll be able to see right
away if a certain relay or bit is on or off,
and what exact command the drive has
been configured with, saving you time.
Motor plug-in
The motor plug-in makes it easier to
select the needed motor type and to
parameterize the drive accordingly.
Simply select the required motor type,
and the corresponding parameters
are listed together with a description
guiding you on how to set the correct
value. The motor types supported by
the motor plug-in are:
Asynchronous
PM, non-salient SPM
PM, salient IPM
Synchronous Reluctance (SynRM)
Customized commissioning experience
19
| Content | Danfoss Drives · DKDD.PB.302.A8.02