manualshive.com logo in svg

Danfoss PVG 32, Руководство по обслуживанию

Поделиться
Скачать
Danfoss PVG 32 Скачать руководство пользователя страница 25

LS connection

Description: Port for LS signal for LS (static) option only controller for variable flow pump.
Location: PVP (inlet) module.
Function: Provide a signal to the variable pump controller to create a pressure differential to have the
pump come on stroke for a closed center system.

Failure mode

Cause

Corrective action

In closed center systems the valve

sections are unstable

Insufficient LS flow to satisfy pump controller

Ensure that the LS controller on the pump does not have excessive
internal leakage - 0.4 l/min [0.106 gal/min]. Repair or replace the
variable pump controller per pump manufactures specifications
If there is more than one valve in the system ensure that the LS
shuttles are all working properly

Excessive air entrained in the hydraulic oil

Ensure that the oil has enough dwell time in tank, has good anti-

foaming agent, and pump inlet vacuum is within manufacturers

specifications

Air trapped in LS line

Bleed air for LS line at highest point

Valve operation is slow to respond

or does not respond

Insufficient LS flow to satisfy pump controller

If more than one section, ensure that the LS controller on the

pump does not have excessive internal leakage. Repair or replace

the variable pump controller per pump manufactures

specifications

Excessive air entrained in the hydraulic oil

Ensure that the oil has enough dwell time in tank, has good anti-

foaming agent, and pump inlet vacuum is within specifications

Air trapped in LS line

Bleed air for LS line at highest point

PVG valve is mounted above hydraulic oil reservoir when shut down and sits idle for some time, the valve

could be voided of oil and this would cause the valve to operate erratically and be slow to respond.

Serviceability: Port is serviceable. Need to connect hose to LS port on pump.

LS connection plug

P107 740E

LS Plug

6 mm
35 Nm [308 lbf•in]

LS signal

Description: The PVG32 uses an internal LS signal network for both Open Center and Closed Center
systems. In Open Center systems the internal LS signal network provides a resolved load sense signal to
the pressure adjustment spool controlling the proper amount of flow and pressure to the operating valve
sections. In Closed Center systems the internal LS signal network provides a resolved load sense signal
directly to the LS pump control which in turn provides the proper amount of flow and pressure to the
operating valve sections.
Location: PVP/PVB Modules.

Service Manual

PVG 32 Proportional Valve Group

PVG 32 Component Troubleshooting

 

©

 Danfoss | February 2017

11039167 | AX00000031en-US0301 | 25

Содержание PVG 32













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды