Danfoss MCX08M Скачать руководство пользователя страница 9

Страница: 9 / 72

Danfoss Electronics spa

Air Handling

seq.- user manual

DKRCC.PS.RI.A1.02 / 520H4358 - Air Handling Seq. user manual - V 2.2

Produced by Danfoss Electronics spa Graphic Department, 10-2009

Use the

and

keys to navigate through the menu; pressing

lets you descend a level in the menu, if this is

possible, and pressing

lets you move up a level.

Use the following keys to modify the selected parameters:

, to enter the modification mode,

and

modify the value,

to confirm the modification and

to abandon it without confirming.

2.4.1|

Displaying and managing alarms

Menu: ALA – Alarms
Sub-menu: AAL – Active

Displays the active alarms.
Screen with description of the alarm (LCD), alarm code and number of active alarms.

Note that you can go to the alarm screen pressing the

key directly from the main screen.

Each screen is dedicated to a specific alarm. Use the

and

keys to move from one screen to the next.

Press

to reset the alarm currently displayed. To reset all alarms keep

pressed for 5 seconds or use the

sub-menu “RAL – Reset”.

Sub-menu: SAL – History

Displays the history of the alarms which are no longer active.
The screens present the alarm code, description (LCD) and duration in days, hours, minutes and seconds.

Each screen is dedicated to a specific alarm. Use the

and

keys to move from one screen to the next.

Pressing the

keys simultaneously voids the alarms history.

2.4.2|

Login

Menu: LOG – Login

Insert the 4-digit password that defines the level of access to the menus and parameters.

Press

and

to modify the value of the digit selected.

Press

to confirm the value and move on to the next digit, if present, or to login.

The LEFT and RIGHT keys, if present, make it possible to move the cursor to the desired digit.

The passwords for access levels 1 through 3 are defined, respectively with parameters L01, L02 and L03.

General

Min

Max

Default

U.M.

Text value

pas

Password

L01

Level 1

9999

L02

Level 2

9999

2000

L03

Level 3

9999

3000

Tab 4 _ [User interface - Menu-LOG - Login]

Note

*If you have not logged in, the

access level is 0. This level does not

let you display any parameters

and menus belonging to higher

access levels. The level for a given

menu and the parameters is

defined through the Configurator

software.“AHU_Interface_vNN.xls”.

Содержание MCX08M









































































Результаты поиска

Содержание MCX08M

Отзывы:

Danfoss MCX08M, Руководство пользователя, Страница: 9 / 72

Результаты поиска

Содержание MCX08M

Отзывы: