Danfoss MCX08M Скачать руководство пользователя страница 10

Страница: 10 / 72

DKRCC.PS.RI.A1.02 / 520H4358 - Air Handling Seq. user manual - V 2.2

Produced by Danfoss Electronics spa Graphic Department, 10-2009

Danfoss Electronics spa

Air Handling seq.

- user manual

2.4.3|

Parameters

Menu: PAR - Parameters

Provides access to the parameters.
For a description of the parameters management submenus,

(see chapter “15] Parameters”)

2.4.4|

Displaying the input/output values

Menu: IO – Input/Output
Sub-menu: IOd – I/O Values
LED Display

The input and output values are displayed in sequence (

and

), indicating the input/output tags on display A

(“AI” for analog inputs; “AO” for analog outputs; “dI” for digital inputs and “dO” for digital outputs) while the value is

shown on display B (analog inputs which are not present or are in alarm mode are indicated with ----).

LCD Display

It is used to call up the three screens that display all inputs and outputs; each screen can display a group of 8 I/O. Use
the

and

keys to move from one screen to the next. The second and third screens are only for the MCX15 and

MCX20.

Fig 3 _ [Menu-based navigation - Displaying the input&output values]

Sub-menu: IOC – I/O Config

If enabled through the Configurator software, makes it possible to access the input/output configuration screens.
For each input/output for the instrument, it is possible to set the type, work field, polarity and function performed.

Содержание MCX08M









































































Результаты поиска

Содержание MCX08M

Отзывы:

Бренды по названию

Популярные бренды

Danfoss MCX08M, Руководство пользователя

Результаты поиска

Содержание MCX08M

Отзывы:

Бренды по названию

Популярные бренды