Danfoss KP Series, Инструкции

Страница: 3 / 4

© Danfoss A/S RI.5D.A2.22
→
DKRCC.PI.C0A.A1.22-520H2749 3
Adjustment spindles location
Note!
Remove lockplate before thermostat
adjustment. Replace lockplate after
adjustment (if desired).
RANGE DIFFERENTIAL
See printed instruction on top of control See printed instruction on top of control
increase temp. (warmer): turn CW Increase: turn CW
decrease temp. (colder): turn CCW decrease: turn CCW
(use adjustment knob) (use adjustment knob or screwdriver)
Determination of diff erential
For KP w/ vapor charge and auto. reset (KP 61, KP 62, KP 63, KP 68, KP 69): Use graphs to determine correct diff erential
Example:
HSP = +45°F (+5.6°C)
=> DIFF (from graph):
LSP = +32°F (0°C 13°F (7.2°C) (value which has to be
set on diff . scale).
For KP w/ adsorption charge (KP 71, KP 73, KP 75, KP 77, KP 79, KP 81):
The diff erential will be HSP less LSP
Example: HSP – LSP = DIFF.
45°F – 35°F = 10°F
(7°C)
(5°C) (2°C)
Note:
(Load Option A)
(Load Option B)
CUT-IN = HSP or CUT-IN = LSP
CUT-OUT = LSP CUT-OUT = HSP
See “Wiring”