Danfoss JS1-H Serviceability, Руководство по обслуживанию

Страница: 16 / 24

5. Put the grommet back in place and push in the snap.
Grip replacement
If the grip needs to be replaced, this should be done after step 2 under Items and faceplate removal on
page 10, when all items have been removed from the faceplate. Then the items are put on the new grip
and assembled following steps under
Items and faceplate assembly on page 12 and PCBA, cup and cable
assembly on page 13.
Service Manual
JS1-H Serviceability for IP54 Joysticks
ST7, PR2, ST2
16 | © Danfoss | July 2019 AX311058842185en-000103