Cable and case will need to be removed, and wires unplugged and pulled through. New wires need to be
routed into the base and installed correctly, then case and cable re-installed. Purchase of a new faceplate
is required. Rollers can only be replaced on analog joysticks.
In order to remove a push button, roller or rocker, the whole faceplate needs to be removed and
replaced.
Remove a push button or a rocker with a flat screwdriver.
Items and faceplate removal
1. Insert a flat screwdriver between the faceplate and the roller and lift it.
2. Push the buttons out using the fingers.
Service Manual
JS1-H Serviceability for IP54 Joysticks
ST7, PR2, ST2
10 |
©
Danfoss | July 2019
AX311058842185en-000103
