3. Push out the item/ items that are not desired and replace with new ones.
4. Close the grip again and tighten the screws back on.
Use: T10, Torque: 1.3 Nm
Items and grip reassembly
Process as described for the push button in
on page 18, with the addition of
the removal of the grip. If the grip needs replacing, remove all the items following
on page 18, step 3 and then replace the grip. Refer to
on page 13 to
reassemble the full joystick.
Service Manual
JS1-H Serviceability for IP54 Joysticks
HR1
©
Danfoss | July 2019
AX311058842185en-000103 | 19
