Danfoss iC7-Marine PROFINET, Руководство по эксплуатации, Страница: 36 / 42

6
Troubleshooting
6.1
Diagnostics
The iC7 series supports diagnostic event messaging for control systems by using faults and warnings. The faults and warnings are
enabled by default. Whenever one occurs, it is indicated on the display of a control system. If diagnosis interrupt is used by the control
system, it is possible to read out the fault or warning event within the PLC program and to react accordingly.
Table 21: Diagnostics Parameters
Menu index Parameter
name Parameter
number Value Description
10.3.2.3.1 Diagnostics
Fault 7081 • Enabled (default)
• Disabled Enables diagnostic fault.
When disabled, the device does not send any
PROFINET diagnosis message with severity
Fault when a fault is present on the device.
10.3.2.3.2 Diagnostics
Warning 7083 • Enabled (default)
• Disabled Enables diagnostic warning.
When disabled, the device does not send
any PROFINET diagnosis message with sever-
ity
Maintenance required when a warning is
present on the device.
6.2
PROFINET Report
The PROFINET report is available in MyDrive® Insight, in parameter 10.3.2.1.1 . The report shows the current status of:
l
Connections
l
Configuration
l
Mapped signals and their values
36
| Danfoss Drives Oy © 2024.04 AQ481922043454en-000101 / 172K4282A
Operating Guide | iC7-Marine PROFINET