manualshive.com logo in svg

Danfoss iC7-Marine PROFINET, Руководство по эксплуатации, Страница: 24 / 42

Поделиться
Скачать
Danfoss iC7-Marine PROFINET Скачать руководство пользователя страница 24

3 

Fieldbus Cable Connections

3.1 

Prerequisites for Installation

Communication interfaces are integrated in the control board in iC7 drives and power converters.

The position of the connections differs based on the control board concept and frame, for example. For more information on the location
of the connections, cabling, and shielding, refer to the product-specific design guide.

3.2 

Communication Interface X1/X2 in Frames FA02–FA12

The communication interface is on the top of the frequency converter as shown in 

Figure 6

. Industrial-grade RJ45 connectors are

recommended for optimal connection. A combined shield/fixing plate, the Fieldbus EMC plate, is available as an accessory to strengthen
the mechanical fixation of the cables.

e3

0b

i5

69

.1

0

X1X2

Figure 6:  Location of the Communication Interface, X1/X2 in FA02-FA12 Frames (with the Optional EMC Plate)

3.3 

Communication Interface X1/X2 in Frames FK06–FK12

The communication interface ports are located inside the frequency converter. The position of the ports and the recommended wiring
path are shown in 

Figure 7

 and 

Figure 8

.

24

 | Danfoss Drives Oy © 2024.04                                                                                                                                                         AQ481922043454en-000101 / 172K4282A

Operating Guide | iC7-Marine PROFINET                                                                                                                                                                                              

Содержание iC7-Marine PROFINET











































Отзывы:

Нет отзывов