H1P 115/130 Auxiliary mounting - Option H3 (SAE B, 13 teeth)
Option H3, ISO 3019-1, flange 101-2 (SAE B, 13 teeth)
P003 388E
2x 146.0 ± 0.35
[5.748 ± 0.014]
11.4 ± 0.25
[0.449 ± 0.010]
330.386 ± 2.0
[13.007 ± 0.079]
314.73 ± 2.0
[12.391 ± 0.079]
4x 73.0 ± 0.175
[2.874 ± 0.007]
∅
107.823
+ 0.13
– 0
[4.245
+ 0.05
– 0
]
∅
101.651
+ 0.076
– 0
[4.002
+ 0.003
– 0
]
20.3 + 1.0
– 0
[0.799 + 0.039
– 0
]
1.956
[0.077]
Thread : M12x1.75-6H THD
Depth : 25.0 [0.984] min.
4x
Spline data
Number of teeth : 13
Pitch fraction
: 16/32
Pressure angle
: 30°
Pitch-
∅
: 20.638 [0.813]
Typ of fit
: Fillet root side
per
: Ansi B92.1-1996 class 6
O-ring seal required
ref 94.92 [3.737] I.D.
x 2.62 [0.103] cross section
R 0.8 max.
[0.031]
Mounting flange surface
Flange 101 - 2 per ISO 3019-1
to be paint free
Specifications
Option
H3
Spline
13 teeth, 16/32 pitch
Maximum torque
395 N•m [3500 lbf•in]
For definitions of maximum and rated torque values, refer to
H1 Axial Piston Pumps Basic Information,
BC00000057, the section “Shaft Torque Ratings and Spline Lubrication”.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
Technical Information
H1 Axial Piston Single Pumps, Size 115/130
Dimensions
44 |
©
Danfoss | May 2017
11063346 | BC00000198en-US0801
