H1P 115/130 Auxiliary mounting - Option H1 (SAE A, 11 teeth)
Option H1, ISO 3019-1, flange 82-2 (SAE A, 11 teeth)
P003 387E
2x 106.4 ± 0.35
[4.189 ± 0.014]
8.1 ± 0.25
[0.319 ± 0.010]
329.857 ± 2.0
[12.986 ± 0.079]
314.73 ± 2.0
[12.391 ± 0.079]
4x 53.2 ± 0.175
[2.094 ± 0.007]
∅
88.621
+ 0.13
– 0
[3.489
+ 0.05
– 0
]
∅
82.601
+ 0.076
– 0
[3.252
+ 0.003
– 0
]
25.3 + 1.0
– 0
[0.996 + 0.039
– 0
]
1.956
[0.077]
R 0.8 max.
[0.031]
O-ring seal required
ref 82.22 [3.237] I.D.
x 2.62 [0.103] cross section
Mounting flange surface
Flange 82 - 2 per ISO 3019-1
to be paint free
Thread : M10x1.5-6H THD
Depth : 16.0 [0.63] min.
4x
Spline data
Number of teeth : 11
Pitch fraction
: 16/32
Pressure angle
: 30°
Pitch-
∅
: 17.463 [0.6875]
Typ of fit
: Fillet root side
per
: Ansi B92.1-1996 class 6
Specifications
Option
H1
Spline
11 teeth, 16/32 pitch
Maximum torque
296 N•m [2620 lbf•in]
For definitions of maximum and rated torque values, refer to
H1 Axial Piston Pumps Basic Information,
BC00000057, the section “Shaft Torque Ratings and Spline Lubrication”.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
Technical Information
H1 Axial Piston Single Pumps, Size 115/130
Dimensions
©
Danfoss | May 2017
11063346 | BC00000198en-US0801 | 43
