Specifications
Option
S1
Spline
14 teeth, 12/24 pitch
Maximum torque
816 N•m [7220 lbf•in]
For definitions of maximum and rated torque values, refer to
H1 Axial Piston Pumps Basic Information,
BC00000057, the section “Shaft Torque Ratings and Spline Lubrication”.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
H1P 115/130 Auxiliary mounting - Option H6 (SAE C, 14 teeth)
Option H6, ISO 3019-1, flange 127-4 (SAE C, 14 teeth)
P003 390E
181.0 ± 0.35
[7.126 ± 0.014]
15.0 ± 0.25
[0.591 ± 0.010]
333.23 ± 2.0
[13.119 ± 0.079]
317.73 ± 2.0
[12.509 ± 0.079]
2x 90.5 ± 0.175
[3.563 ± 0.007]
∅
134.06
+ 0.13
– 0
[5.278
+ 0.05
– 0
]
∅
127.05
+ 0.076
– 0
[5.002
+ 0.003
– 0
]
23.3 + 1.0
– 0
[0.917 + 0.039
– 0
]
1.956
[0.077]
4x 114.5 ± 0.35
[4.508 ± 0.014]
8x 57.25 ± 0.175
[2.254 ± 0.007]
Mounting flange surface
Flange 127 - 4 per ISO 3019-1
to be paint free
Spline data
Number of teeth : 14
Pitch fraction
: 12/24
Pressure angle
: 30°
Pitch-
∅
: 29.633 [1.167]
Typ of fit
: Fillet root side
per
: Ansi B92.1-1996 class 6
R 0.8 max.
[0.031]
O-ring seal required
ref 120.32 [4.737] I.D.
x 2.62 [0.103] cross section
Thread : M12x1.75-6H THD
Depth : 25.0 [0.984] min.
4x
Thread : M16x2.0-6H THD
Depth : 28.5 [1.122] min.
2x
Specifications
Option
S1
Spline
14 teeth, 12/24 pitch
Maximum torque
816 N•m [7220 lbf•in]
For definitions of maximum and rated torque values, refer to
H1 Axial Piston Pumps Basic Information,
BC00000057, the section “Shaft Torque Ratings and Spline Lubrication”.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
Technical Information
H1 Axial Piston Single Pumps, Size 115/130
Dimensions
46 |
©
Danfoss | May 2017
11063346 | BC00000198en-US0801
