H1P input shaft - Option F3, Code 44-3
Option F3, ISO 3019-1, Code 44-3, Diameter 44.5 taper 1:8, without key and no through-hole in the end of
the shaft
P003 520E
8.025 ±0.8
[0.361 ±0.31]
93.7 ±1.0
[3.689 ±0.039]
39.7 ±1.0
[1.563 ±0.039]
125 ±0.5 : 1000
(54.0)
[2.126]
∅
44.45 [1.750]
Coupling must not
overlap till this point
Shafts
to be paint free
Conical keyed shaft end
similar to ISO 3019-1 code 38-3
Suitable key
7
/
16
x
7
/
16
x 1
3
/
4
ANSI B17.1
1
1
/
4
-12
12.45 ±0.25
[0.49 ±0.01]
∅
152.0
0
– 0.05
[6.000
0
– 0.002
]
Mounting flange surface
Flange 152 - 4 per ISO 3019-1
to be paint free
Specifications
Option
F3
Tapered shaft
44-3 taper without key
Torque rating
Rated
1766 N•m [15 630 lbf•in]
Maximum
2354 N•m [20 830 lbf•in]
Mating part must maintain a minimum gap width of 1.0 mm with the shaft shoulder after installation of
the part. Transmittable torque will be reduced if the minimum gap requirement is not met.
Rated torque includes just the capability of the press-fit in accordance with an assumed fastener grade 5.
For definitions of maximum and rated torque values, refer to
H1 Axial Piston Pumps Basic Information,
BC00000057, the section “Shaft Torque Ratings and Spline Lubrication”.
Technical Information
H1 Axial Piston Single Pumps, Size 115/130
Dimensions
40 |
©
Danfoss | May 2017
11063346 | BC00000198en-US0801