Danfoss ET5025, Руководство оператора

Страница: 44 / 92

actual dimension and the specified dimension (see "Setting the
forming dimension" in Section 5).
The operation mode Remote automatic via the dual foot switch is
only functional if the plug of the dual foot switch is connected to the
control cabinet.
5.3.4 Remote automatic mode, via depth stop
WARNING!
Risk of squeezing!
When the die system closes, there is a risk of getting squeezed
between the die and the workpiece.
• Keep the feed opening for the workpiece as small as possi-
ble.
• Keep a minimum distance of 120 mm (A) to the die system.
1. Switch on the button to activate the depth stop.
2. Insert the pre-assembled workpiece into the machine manually
and press it against the depth stop.
3. Hold the workpiece with one hand during forming; the workpiece
must continuously activate the depth stop during forming.