Danfoss ET5025, Руководство оператора

Страница: 47 / 92

ATTENTION!
Risk of damage to machinery!
If the crimping dies protrude beyond the basic and intermediate
dies, the crimping dies, the intermediate dies and the machine
will be damaged (see (X) in the figure). In the figure, the crimping
die (2) is placed incorrectly.
•
Place the crimping die (2) in the base and/or intermediate die
(3) so that it does not protrude.
In the figure, the crimping die (1) is placed correctly.
5.4 Adjusting the depth stop
The depth stop must be specifically adjusted according to the work-
piece. When inserting the workpiece, the crimping process is trigge-
red by touching the stop plate. After reaching the defined forming dia-
meter or forming pressure, the crimping tool stops automatically. For
special applications, such as pipe bends, the depth stop must be re-
moved.