Danfoss EM-PMI540-T3000, Руководство пользователя

Страница: 6 / 67

Table 2. EM-PMI540-T3000 options
Feature
Option Standard
option
Explanation
High voltage
connections
-DUAL x
2 connection boxes each containing one 3 phase system with
one M32 cable gland per phase
-QUAD
4 connection boxes each containing one 3 phase system with
one M32 cable gland per phase
Bearing insulation
* x No insulation
+BIN SKF 6216 insulated bearing in N-end
+BIA SKF 6216 insulated bearing in both ends
Rotation sensor
(resolver)
* x No rotation sensor
+RES1 In-built non contacting resolver, 8-pole pair
Winding
temperature
sensor
* x 6 x PT100 in the windings
+TEMP4 12 x PT100 in the windings
Bearing
temperature
sensor
* No temperature sensors
+BTMP1 x PT-100 in bearings with plug in connector
Anti-condensation
heaters
* x No anti-condensation heaters
+HEAT2 2 x 230VAC/50W
Conformity according to standards
The electric machine has been designed to be in conformity with the following directives and to
meet the requirements speci ed in the following standards:
Table 3. Applicable Directives and standards
Standard Explanation
Low Voltage Directive 2006/95/EC
(until 19.4.2016) and Low Voltage
Directive 2014/35/EC (from
20.4.2016 onwards)
Electrical equipment means any equipment designed for use with a
voltage rating of between 50 and 1000 V for alternating current.
This electric machine is subject to the Low Voltage Directive
2006/95/EC or 2014/35/EC.
Machinery Directive 2006/42/EC
This electric machine is partly subject to the Machinery Directive
2006/42/EC and it is considered as partly completed machinery, as a
part of the nal machinery.
IEC 60034-1:2010 Rotating electrical machines - Part 1: Rating and performance
IEC 60034-5:2001/A1:2007
Rotating electrical machines - Part 5: Degrees of protection provided
by the integral design of rotating electrical machines (IP code) -
Classi cation
EM-PMI540-T3000
1. General information
| BC265857716810en-000103
© Danfoss | Produced By: Danfoss Power Solutions | November 2018 | 5