Danfoss EM-PMI540-T3000, Руководство пользователя

Страница: 56 / 67

Service policy
Maintenance and service of the electric machine is limited to the procedures described in this
manual. See Chapter Service parts below for a list of available service parts. For further information,
contact Danfoss.
Service parts
The recommended service parts are listed in the table below. Quantity describes the number of
components in a single electric machine. Maintenance procedures not decribed in this manual
require special tools and instructions. Contact Danfoss for more information and purchasing.
Figure 34. Recommended service parts
Part
number
Item (order)
number
Qty Description Type
1 10451 1 Seal, O-ring 184.5 X 3 NBR70
2 11040 1 Seal, Radial lip, D-end
75 X 100 X 10 FKM,
TRELLEBORG, TREB00750
3 10935 1
Bearing, D-end, Deep groove ball (non insulated
in D-end, BI0, and BIN options)
SKF 6216 C3
4 11093 1
Bearing, D-end, Deep groove ball (insulated in
D-end, BID and BIA options)
SKF 6216 C3VL0241
INSOCOAT
5 10450 1 Seal, O-ring 138 x 4, NBR 70
6 10546 2 Grease nipple (both in D-end and N-end) DIN 71412, M10 x 1
6 10450 1 Seal, O-ring 138 x 4, NBR 70
EM-PMI540-T3000
11. Aftersales
| BC265857716810en-000103
© Danfoss | Produced By: Danfoss Power Solutions | November 2018 | 55