Danfoss EM-PMI540-T3000, Руководство пользователя

Страница: 34 / 67

Figure 17. Connection diagram for QUAD option
Cable gland assembly and power line connection
This chapter describes how to assemble screened power cables to the electric machine. See the
cable glands recommendations from the table below. Cable gland assembly instruction can also
be found from PFLITSCH gland catalogue available from http://www.p itsch.de .
Use correct type of gland for different cable diameters. These are shown in Table Cable gland
alternatives.
Table 7. Cable gland alternatives
Cable diameter
Cable gland
35 mm
2
50 mm
2
70 mm
2
P itcsh blueglobe mstri225 x x
P itcsh blueglobe mstri232 x x
1. Remove the small hexagonal piece from the BlueGlobe-sealing insert as shown in Figure
BlueGlobe-sealing
Figure 18. BlueGlobe-sealing
2. Cut the cable sheath at the distance A from the end of the cable, see Figure Cut lenght of the
cable sheath. Pull the cut part of the sheath partly (length B is from 10 to 15 mm) off the cable as
shown in the gure. The distance A depends of the length of the cable lug used. Measure with the
cable lug that is used and cut to suitable lenght.
EM-PMI540-T3000
6. Installation
| BC265857716810en-000103
© Danfoss | Produced By: Danfoss Power Solutions | November 2018 | 33