Danfoss EM-PMI540-T3000, Руководство пользователя

Страница: 35 / 67

Do not remove the cable sheath completely at this point and do not cut the braid screen of the cable!
Figure 19. Cut lenght of the cable sheath
3. Insert the cable to the cable gland with slight turning motion. This helps the cable go through
the spring inside the cable gland. Push the cable gland against the sheath of the cable as shown in
Figure Cable to the gland assembly.
Figure 20. Cable to the gland assembly
4. After the cable gland is in place remove the length A piece of the sheath and cut the braid
screen (cover) from 10 mm (distance C) from the gland bottom as shown in Figure Cut the braid
screen.
Make sure that the cable gland spring is against the cable sheath before cutting the braid screen.
EM-PMI540-T3000
6. Installation
34 | © Danfoss | Produced By: Danfoss Power Solutions | November 2018
| BC265857716810en-000103