Danfoss DHP-S&DP, Руководство по установке

Страница: 29 / 44

11 Menu information
Menu description regards software with version 1.3.
The heat pump has an integrated control system which automatically calculates the heat demand in the house to
ensure that the correct amount of heat is produced and emitted where necessary. There are many different values
(parameters), which are required in order to do the calculation of the heat demand.
During installation and service, the control panel is used to set and change values that have to be adapted according
to the house demand. The control panel consists of a display, a keypad and an indicator. In the display, a simple menu
system is used to navigate the desired settings and values. During operation, the display always shows the set ROOM
value, the operating mode and the status of the heat pump.
3
2
1
ROOM
NO HEAT DEMAND
OPERAT. AUTO
20°C
(20°C)
Figure 18. Display, keypad and indicator.
Position Description
1 The display text and symbols are only shown as examples. Certain symbols cannot be displayed at the
same time.
2 Keypad:
+ Plus sign used to scroll up a menu or increase the values.
- Minus sign used to scroll down a menu or reduce the values.
> Right arrow used to select a value or open a menu.
< Left arrow to cancel selection or exit a menu.
3 Indicator
The control system is operated via a user-friendly menu system, which is shown in the display. Use the keypad’s four
navigation symbols to navigate the menus and increase or reduce the set values.
The control system is divided into the following two main menus:
•
INFORMATION
•
SERVICE
The INFORMATION menu is used to adjust the following (also see INFORMATION menu:
•
Operation
•
Heat curves
•
Temperatures
•
Operating time
•
Menu system language
Installation instructions
VMIFJ102
– 27