Danfoss DHP-S&DP, Руководство по установке

Страница: 8 / 44

To avoid noise caused by pipe mounting, a rubber-coated pipe clamp should be used to prevent the transmission
of vibrations. However, installation should not be too rigid and the pipe clamp must not be too tight.
Figure 1. Do not twist the flexible hoses as they are installed. At threaded connections, use a counterhold spanner
Figure 2. Cut the hose to the correct length to avoid excess bowing-out or stretching at bends
Figure 3. Cut the hose to the correct length to avoid excess bowing-out or stretching and offset the ends so that the hose
is installed completely straight.
Figure 4. Use fixed pipe bends to avoid excess stress on bends next to connections
2.2.2 Preventative measures
Some of the following points can also be used when troubleshooting.
•
Do not install heat pumps on walls adjoining bedrooms.
6 – Installation instructions
VMIFJ102