Installation and User Guide
DEVIreg™ Multi
FEC | Produced by Danfoss ©
15
4.4
Control modes, special functions, special statuses and settings
Each of 7
Channels
has possibility to be individually set up with one of
three control
modes –
1S
(1 Sensor),
PR
(Power Regulation) and
MOn
/
MOf
(
Manually On/Of
) .
The controller configurations for these 3 modes are the following:
1 . Single sensor control with temperature sensor or
1S
: one temperature sensor input,
one relay output;
2 . Power regulation control or time proportional power regulation or
PR
: no sensor
input, one relay output;
3 . Heating control
Manually On
and
Manually Off
with setting time period or
MOn
and
MOf
: no sensor input, one relay output;
Together with any control mode could be set up or enabled/disabled some special functions
and statuses: “
Relay status RO/RC
”, “
CableOK?
”, “
Relay test 5/30
”, “
Channel ON/OFF
” and
“
Device ON/OFF
” . Special functions and statuses are specified in chapters below .
Additionally, any
Channel
can be set up with status ‘not
Active
’ or
Active = No
. It means
Channel
does not work at all and “empty” line appears on the
Main Screen
.
4.4.1
Active and Not Active Channel status
Not
Active
status can be used for applications there is no need to use full channel set of 7 .
And view/line for the
Channel
which is not used is simply deleted from the screen .
By the way, standard factory setting for
DEVIreg™ Multi
supposes 1 active
Channel #2
.
The
Main Screen
with the only one Active
Channel #2
is as on the picture below:
