Installation and User Guide
DEVIreg™ Multi
FEC | Produced by Danfoss ©
29
4.4.9
Relay Test 5/30– special function
Each
Active Channel
Relay can be tested by this function . When function is started, the
corresponding
Channel
relay switches
On
and
Of
every 5 sec . within 30 seconds .
Start of special test function
Relay Test 5/30
can be done by the following menu sequence:
EN: Main Screen – Enter to Main Menu – Channels settings – Channel #X –
Relay Test 5/30 sec – {Enter – STOP/START }
EN: Main Screen – Enter to Main Menu – Channels settings – Channel #X – Relay Test
5/30 sec – {Enter – STOP/START }
NB: When this function is started nothing new appears on the screen(-s). Only the switching
sound of the corresponding relay is heard.
4.4.10 Alarms, alarm data and alarm relay
DEVIreg™ Multi
controller has
Alarm
relay with both types of contacts –
NO
and
NC
. For
Alarm
used controller contacts which have number 8 –
NC8
,
C8
and
NO8
. Connection
diagram is shown on the picture below:
Alarm
NC 8
DI 8
C 8
NO 8
