19
08090471 - 01
INT
Mount the Devidry™ Kit to the wall.
The Devidry™ Kit should be installed in
accordance with the instruction manual
supplied with the kit.
Cut a piece of material from the filler
material to make room for the plug-in
connection between the Devidry™ Kit
and the Devidry™ element. Make sure
not to fold and/or squeeze the cord
between the kit and the floor heating
element but make room for the cord in
the filler material. Minimum bending
diameter is 5 cm.
The sensor is installed by clicking the
connector into the port in the Devidry™
CD. The sensor must be placed so at
least 30 cm of the sensor is lying on the
Devidry™ heated element. And the end
of the sensor should be placed right
between two cables in the element as
shown in the figure.
Devidry™ C
Devidry™ CD
7. Mounting the Devidry™ Kit
