18
08090471 - 01
At this point all connections between
the elements should be aligned and
connected and as much of the floor
as possible should be covered with
Devidry™ elements. The space without
Devidry™ heating elements should be
covered with the Devidry™ Filler Mate-
rial to ensure an even and homogenous
floor surface. A lineal and a wooden
plate can be used when cutting the
Devidry™ Filler Material to avoid cutting
into the electrical parts and ensuring a
straight cut.
To be certain that the distribution of the
floor heating elements in your room is
correct, we suggest you make every-
thing fit before you secure the elements
permanently. It is most important to
make sure that all plug-in connections
are perfectly aligned to allow the flow of
electricity from one element to the next.
Put the floor heating elements plus any
filler materials down as shown in the lay-
out. Once you have correctly positioned
all floor heating elements and you have
cut the filler material to size, you can
proceed with the permanent installation
as explained in the following steps. (If
you plan to install the Devidry™ under
carpets we recommend taping the ele-
ments together with Devidry™ Tape as
shown on the picture).
10
20
30
6. Filling up the remaining space
