23
08090471 - 01
INT
Safety precautions
• Use the floor heating element for the
purposes described in the directions
only.
• Devidry™ must always be installed with
the Devidry™ Kit.
• Mount and connect the Devidry™ Kit to
the mains following the correct installa-
tion instructions supplied with the Kit.
The Devidry™ Kit is sold separately.
• The Devidry™ floor heating system is to
be supplied through a residual current
device having a rated residual operat-
ing current not exceeding 30 mA.
• All the used Devidry™ elements must
have the same area output.
• The Devidry™ elements are not to be
installed on irregular surfaces.
• Do not fold or sharply bend the floor
heating elements.
• In order to avoid a fire hazard, the Devi
-
dry™ 100 is to be installed only above
a floor of concrete or similar material.
Devidry™ 55 can be installed on either
concrete or wooden floors.
• The controller Devidry™ C100 must
only be used with installations on con-
crete floors and Devidry™ C55 can be
used with both floor constructions.
• Devidry™ heating element must be
separated from other heat sources.
• The Devidry™ heating element must
not be installed at ambient tempera-
tures below 5°C.
• The Devidry™ floor heating system is
only for indoor use.
• Do not install or use the floor heating
system after one or more components
have been damaged.
• Do not allow home repairs under any
circumstances. Repairs must be carried
out by qualified electricians. Faulty
repairs may cause personal injury or
damage to property.
• Do not use the floor heating in combi
-
nation with parts that are not recom-
mended, installed or supplied by DEVI.
• Use original parts of the Devidry™ floor
heating system only. The warranty for
the entire system and for the separate
parts becomes null and void if parts
from other manufactures have been
used.
• Make sure that no hot spots develop
when using the floor heating system.
Avoid hot spots by ensuring that the
heat from the floor heating is homoge-
neously released to the area you wish
to heat. Do not install the floor heating
element under permanent or built-in
cupboards (full covering furniture).
• Do not use the Devidry™ floor heating
system if the system is wet.
• Warning label should be filled out and
placed next to the distribution switch-
board.
• The Devidry™ floor heating system
is only to be used with the Devidry™
extension cords (The Devidry™ X). Do
never cut the extension cords or the
output cords.
• Do not buckle the supply cord and the
extension cords; do not have them run
across hot and/or sharp objects.
• Unroll the cords entirely to prevent the
cords from overheating.
• Remove the plug from the wall socket
outlet if work is carried out at or near
the floor heating system when fluids or
sharp objects are being used.