![background image](http://html1.mh-extra.com/html/danfoss/cf-rc/cf-rc_instruction_3443879016.webp)
Danfoss Heating Solutions
VIUHM602
© Danfoss 03/2011
16
6.1.7 Dew sensor power
Menu
Setup
Service
Dew sensor power:
Activate
Dew sensor power
to configure
a dew sensor to be powered by CF-MC Master Controller (only output 5 can be used).
Status of output 5 is displayed:
• If output 5 is in use, Remote Controller tells you where.
• If nothing is installed on output 5,
Sensor not detected
is displayed.
• If a dew sensor is installed on output 5, the power status is displayed as
ON
or
OFF
.
Select
Change
to change the power status.
• Confirm the changes with
Yes
or discard the changes with
No
.
7. Uninstallation
Resetting CF-RC Remote Controller (fig. 1)
• At the same time, activate the Soft key 1
, the soft key 2
and the down selector
.
• Remote Controller requests confirmation before resetting. Confirmation with
Yes
resets
Remote Controller.
• Confirm reset with
Yes
. Remote Controller is now ready for installation to a Master
Controller.
Note: Please see Master Controller instruction for further details.
8. Specifications
Cable length (power supply)
1.8 m
Transmission frequency
868.42 MHz
Transmission range in buildings (up to)
30 m
Number of Repeater Units in a chain (up to)
3
Transmission power
< 1 mW
Supply voltage
230 VAC
Ambient temperature
0-50°C
IP class
21
Instruction
CF-RC Remote Controller
Содержание CF-RC
