Danfoss CF-RC, Инструкция

Страница: 11 / 20

11 © Danfoss 03/2011 VIUHM602 Danfoss Heating Solutions
Instruction CF-RC Remote Controller
5.4 Alarms
If an error occurs in the CF2 + system, it is indicated by Master Controller and directly on
the Remote Controller display:
An alarm has occurred.
Press key to acknowledge.
OK
When the alarm is acknowledged with OK, the Master Controller buzzer will go off (if set
to Sound On, see chapter 5.3), and the CF2
+ system will switch to Alarm status as indi-
cated on the start-up screen:
16:14 Tue. 26. July 05
Kitchen
20.0°C
Status
Alarm
Menu
This indication of Alarm on Remote Controller and the indication on Master Controller
will continue until the error that caused the alarm has been fixed.
An Alarms menu will be present at the top of the Menu list, activated from the start-up
screen:
Menu
Alarms
Rooms
Program
Setup
OK Back
Activating the Alarms menu with OK provides access to an Alarm status with a descrip-
tion of the error causing the alarm. Select the Alarm log to get specific information about
the error causing the alarm and the time for its registration by the system.