background image

9

© Danfoss    03/2011

 

VIUHM602

 

Danfoss Heating Solutions

Instruction 

CF-RC  Remote  Controller

Select time for the setback program by defining the time periods with 

normal room tem-

perature

, indicated by the black bars above the time line (the periods outside the black 

bars are the setback periods with 

reduced room temperature

).

Set start and end times by means of the left/right selector and by toggling between them 
using the up/down selector (fig. 1- 

/

).

Note:  A period with normal room temperature is removed by setting start and end to the 

same time. The period is recreated by means of the up/down and left/right selectors.

Confirm with 

Ok

 to activate an overview of the created program (the days selected in the 

program are indicated by bold letters). 

Program 1

S

M T W

T

F S

00

06

12

18

24

Activate?

Ok

Cancel

Activate the program with 

Ok

.

Cancel program

A created program can be deleted with the 

Cancel Program

 

menu leading to the over-

view illustrated above.

Note:   In the 

Options

 menu, the created programs (1-3) will be indicated by more distinct 

capitals.

Note:   If you want to override a setback period in a room, you can do so with the

 

Override 

setback

 function in the 

Options

 menu for each room (see chapter 5.1.1).

Setback temperature

In the 

Setback program

 (see chapter 5.2.2), activate the 

Setback temperature

 menu to 

set the room temperature reduction from 1 to 10°C during setback periods. 

Содержание CF-RC





















Отзывы: