AK-CC 750A
RS8HP102 © Danfoss 2018-09
73
Setup logs
1.
Go to the overview
Press the blue overview button with the log symbol.
2.
Log display
3. New logs
The top line gives access to definition of new logs and to
changes of already established logs.
The next line enables you to see a selection of the defined logs
Here is the start display for new logs
Start by defining which type of log has to be defined
Here it is determined which parameters have to be included
in the setup of data.
Select a function here, then a parameter, and finish with OK.
Press hereafter "Arrow right"
Here is the survey of all the parameters that are collected in
the log.
If a parameter has to be removed from the log collection, you
must select the parameter and then press "Arrow left".
A LOG CAN ONLY BE DISPLAYED IF:
• THE CLOCK HAS BEEN SET AND
• THE CONFIGURATION IS LOCKED