AK-CC 750A
RS8HP102 © Danfoss 2018-09
5
Direct connection
Setup and operation of an AK controller must be accomplished via
the “AK-Service Tool” software program.
The programme is installed on a PC, and setup and operation of
the various functions are carried out via the controller’s menu
displays.
Displays
The menu displays are dynamic, so that different settings in one
menu will result in different setting possibilities in other menus.
A simple application with few connections will give a setup with
few settings.
A corresponding application with many connections will give a
setup with many settings.
From the overview display there is access to further displays for
the regulation.
At the bottom of the display there is access to a number of general
functions, such as “time table”, “manual operation”, “log function”,
“alarms”, and “service” (configuration).
Network linking
The controller can be linked up into a LON-network together with
other controllers in an ADAP-KOOL® refrigeration control system.
After the setup operation can be performed at a distance with,
say, our software program type AKM.
Users
The controller comes supplied with several languages, one of
which can be selected and employed by the user. If there are sev-
eral users, they may each have their choice of language. All users
must be assigned a user profile which either gives access to full
operation or gradually limits the operation to the lowest level that
only allows you “to see”.
External display
An external display can be fitted in order to show the air tempera-
tures around the evaporators.
In AK-CC 750A up to 4 displays can be mounted.
A graphical display with control buttons can also be fitted.