Dane Technologies QuicKART 2000 Series, Руководство по обслуживанию

Страница: 71 / 115

Dane Technologies, Inc. QuicKART 2000 Series Service Manual
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com 970-011 Rev. 3/1/06
71
1) Speed limit pot wire broken
2) Broken speed limit pot
-- Emergency reverse wiring fault (BB Wiring Check)
1) BB wire open (BB = Belly Button switch or the Emergency Shut-OFF switch
on all models except the PP3000/PP3100/PP3150) (The switch is called the
Emergency Reverse switch on the PP3000/PP3100/PP3150)
2) BB check wire open
-- EM Brake driver fault
1) Electromagnetic brake coil open
2) Electromagnetic brake wiring open
-- Throttle fault (Throttle fault 1)
1) Throttle input wire open
2) Throttle input wire shorted to ground or B+
3) Throttle pot defective
4) Wrong throttle type selected
-- Not Used
-- Low battery voltage
1) Battery voltage below 21 volt cutoff level
2) Corroded or loose battery terminal
3) Loose controller terminal
-- Overvoltage
1) Battery voltage above 48 volt cutoff
2) Vehicle operating with charger attached.
-- Over/under temperature cutback, (Thermal cutback)
1) Temperature more than 95
o
C, or less than – 25
o
C
2) Excessive load on vehicle
3) Improper mounting of controller
4) Operation in extreme environment
-- Not Used