Dane Technologies, Inc.
QuicKART 2000 Series
Service Manual
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com
970-011 Rev. 3/1/06
66
RECYCLE CHARGE STAGE –FIVE
After completion of the first four stages, the charger will sit in Float Mode. If the charger
is left connected to a battery for many weeks/months to maintain the batteries at full
charge, the charger will automatically reinitiate a charge cycle routine that starts at the
Pre-Qualification Stage, once every 28 days.
This charger cannot repair the damage done to batteries by someone else’s charger.
Detection Fault
The Red L.E.D. illuminates continuously if the charger has not detected the connection
of a battery of proper polarity and voltage on it’s output leads. Once connected, a
waiting period of about 3 seconds elapses before the charger recognizes the battery.
