W E B S T A T I O N M a n u a l P a g e 27
12.5
MASTER SETTINGS
In this chapter the master settings of the console will be discussed.
12.5.1
Silence Detection
The Webstation console is equipped with a software silence detection unit which is used to monitor the program buss (left, right
, stereo) in the event of the signal going below the
threshold
(-40...0dB) after a given
interval
. In this situation the unit will go into
ALARM state and switches the nonstop source to the master output. The
Interval Unit
can be set to seconds or minutes.
The red flashing nonstop switch on the console indicates the alarm state. The silence alarm can be reset by pressing the nonstop
switch (which will become green). The Program buss is routed to the master output after the reset.