Vision manual page:9
2.9 Master in/outputs
The Vision can be interfaced with external equipment such as two track master machines,
signal processors, headphone amps, and power amps. Interfacing is possible using the connectors
on the master back panels. Listed below are all inputs and outputs for the two master modules.
Partly the connectors are on the back panels of the modules. Some output connectors are mounted
in the frame along with the MIDI interface connectors.
The Standard Master module houses (from top to bottom) the Aux
1 to 4 outputs ( which are ground compensated) and the stereo Aux "A" return jack. Below these
connectors are the master inserts left and
right.
In the Frame of the Vision series
you will find the balanced XLR
outputs of the Left/right and
Mono outputs.
The ground compensated
Control Room Monitor left and
right outputs.
The unbalanced CRM 2 outputs
as well as the unbalanced two
track returns.
On the right side of the consoles frame there are the MIDI in/out/thru din connectors which are needed when the
MIDI mute system is installed and communication needs to be made between external signal processors and /or midi
sequencers. A separate manual is available for the MIDI control module which will be connected to the REMOTE
connector.
The 19" rack version has an internal power supply and the desktop versions have an external power supply fed by a Speakon
connector that can handle a lot of current.
The DELUXE Master module (Aux masters 5 thru 8 and Talkback) has the following connectors on the back plate.
The connectors on this module back plate are the ground compensated Aux 5 thru 8 master outputs and
the Aux B return input. Aux sends 1 thru 8 are used for sending signals within the console to eight different signal
processors such as digital reverbs. These outputs are ground compensated.
