6
User Manual, Rev 02
Rad-icon 2329 GigE Detector
Teledyne DALSA
operation of the camera system in the End-user's installation. It is the Users and End-
users responsibility to ensure that local and federal guidelines regarding the
installation and operation of X-ray sources are followed.
The power requirements of the product, especially the voltage specifications, must be
strictly adhered to or warranty will be void.
No User Serviceable Components
There are no components in this system which need to be replaced, modified, or
adjusted by the end user. Please contact Teledyne DALSA Support for assistance if
needed.
Safety Warning:
Tampering with this product voids the warranty and may degrade
the detectors image quality, resulting in a possibly unsafe condition for (End-)
Users.
The system has been designed to minimize the amount of interference it may
generate in an installation. This equipment generates and can radiate radio frequency
energy and, if not installed and operated in accordance with the instructions, may
cause harmful interference to other devices in the area.
Stacking
Teledyne DALSA does not recommend that the user stack the product or use it in
adjacent to other equipment. If this arrangement is unavoidable, then the (End-)user
must ensure that there is adequate airflow around the detector and that normal
operation conditions are maintained.
Disposal of Product
The detector contains lead and no batteries. Dispose the unit in accordance with local
regulatory guidelines.
EMC compliance
To ensure EMC compliance, follow these specific guidelines:
Ensure that all cable shields have a 360
electrical connection to the
connector.
Tightly fasten and secure all connectors.
Warning
The detector can influence the performance of very sensitive equipment.
Strong EMC disturbances can influence the detectors performance.
System precautions
The following are precautions that must be taken in order to prevent possible damage
to your Teledyne DALSA Detector system:
Warning:
The use of accessories, power supplies and cables other than those specified, with the
exception of cables sold by Teledyne DALSA as replacement parts, may result in
increased emission or decreased immunity of the Rad-icon Detector.
