Dalsa Piranha3, Руководство пользователя

Страница: 77 / 91

Piranha 3 User Manual
DALSA 03-032-10216-02
77
Command Syntax Parameters Description
calculate camera gain
ccg
i t i
Calculates the camera gain and optimizes
tap matching according to the selected
algorithm.
i
= Calibration algorithm to use.
1
= This algorithm adjusts analog
gain so that 8% to 13% of tap ROI
pixels are above the specified target
value.
2
= This algorithm adjusts analog
gain so that the average pixel value
in tap’s ROI is equal to the specified
target value.
3
= This algorithm adjusts digital
gain so that the average pixel value
in tap’s ROI is equal to the specified
target.
4 =
This algorithm adjusts the analog
gain so that all tap ROI pixels are
within 98% of the specified target
value and then performs a PRNU
correction.
t =
Tap value. Use
0
for all taps or
1
to
8
for individual tap selection.
i
= Calibration target value in a range
from
1024
to
4055
DN (12 bit LSB).
correction calibrate prnu
ccp
Start PRNU coefficient calibration. Refer
to section 3.4.2 Analog and Digital Signal
Processing Chain for details.
camera link mode
clm i
Sets the Camera Link configuration,
number of Camera Link taps, and data
bit depth.
15
: Medium configuration, 4 taps, 8 bit
output
16
: Medium configuration, 4 taps, 12 bit
output
21
: Full configuration, 8 taps, 8 bit
output
Refer to section 3.3.1 Setting the Camera
Link Mode for details.