Dalsa Piranha3, Руководство пользователя

Страница: 24 / 91

Piranha 3 User Manual
03-032-10216-02 DALSA
24
•
The camera will answer each command with either <CR><LF> “OK >" or
<CR><LF>"Error xx: Error Message >" or “Warning xx: Warning Message”. The ">"
is always the last character sent by the camera.
The following parameter conventions are used in the manual:
i
= integer value
f
= real number
m
= member of a set
s
= string
t
= tap id
x
= pixel column number
y
= pixel row number
Setting Baud Rate
Purpose: Sets the speed in bps of the serial communication port.
Syntax:
sbr m
Syntax Elements:
m
Baud rate. Available baud rates are:
9600
(Default),
19200
,
57600
, and
115200
.
Notes:
•
Power-on rate is always 9600 baud.
•
The
rc
(reset camera) command will not reset the camera to
the power-on baud rate and will reboot using the last used
baud rate.
Example:
sbr 57600
Camera Help Screen
For quick help, the camera can return all available commands and parameters through
the serial interface.
There are two different help screens available. One lists all of the available commands to
configure camera operation. The other help screen lists all of the commands available for
retrieving camera parameters (these are called “get” commands).
To view the help screen listing all of the camera configuration commands, use the command:
Syntax:
h
To view a help screen listing all of the “get” commands, use the command:
Syntax:
gh
Notes: For more information on the camera’s “get” commands, refer to
section 3.6.6 Returning Camera Settings.
The camera configuration command help screen lists all available commands. Parameter
ranges displayed are the absolute maximum ranges available. Depending on the current
camera operating conditions, you may not be able to obtain these values. If this occurs,
values are clipped and the camera returns a warning message.
Some commands may not be available in your current operating mode. The help screen
displays NA in this case.