Dalsa Piranha3, Руководство пользователя

Страница: 31 / 91

Piranha 3 User Manual
DALSA 03-032-10216-02
31
Setting the Exposure Time
Purpose: Sets the camera’s exposure time is µs. Camera must be operating in
mode 2 or 8.
Syntax:
set f
Syntax Elements:
i
Desired exposure time in µs. Allowable values are
3
to
3330
µs.
Notes:
•
To read the current line frequency, use the command
gcp
or
get set
.
•
If you enter an invalid line rate frequency, an error message is
returned.
Related Commands:
sem , ssf
Example:
set 400.5
3.3 Camera Output Format
3.3.1 Setting the Camera Link Mode
Purpose: Sets the camera’s Camera Link configuration, number of Camera
Link taps and data bit depth. Refer to Table 12 for a description of
each Camera Link mode.
Syntax:
clm m
Syntax Elements:
m
Output mode to use:
15
: Medium configuration, 4 taps, 8 bit output
16
: Medium configuration, 4 taps, 12 bit output
21
: Full configuration, 8 taps, 8 bit output
Notes: •
To obtain the current data mode, use the command
gcp
or
get
clm
.
•
The bit patterns are defined by the DALSA Camera Link
Roadmap and the Camera Link Standard.
Example:
clm 15
i
Applies to Modes 2 and
8