Dalsa Linea HS Series, Руководство пользователя

Страница: 16 / 74

16

The Linea HS Monochrome Cameras
Precautions
Read these precautions before using the camera.
Confirm that the camera’s packaging is undamaged before opening it. If the packaging is damaged
please contact the related logistics personnel.
Do not open the housing of the camera. The warranty is voided if the housing is opened.
Keep the camera’s front plate temperature in a range of 0 °C to +65 °C during operation. The
camera has the ability to measure its internal temperature. Use this feature to record the internal
temperature of the camera when it is mounted in your system and operating under the worst case
conditions. The camera will stop outputting data if its internal temperature r80 °C.
Do not operate the camera in the vicinity of strong electromagnetic fields. In addition, avoid
electrostatic discharging, violent vibration, and excess moisture.
To clean the device, avoid electrostatic charging by using a dry, clean absorbent cotton cloth
dampened with a small quantity of pure alcohol. Do not use methylated alcohol. To clean the
surface of the camera housing, use a soft, dry cloth. To remove severe stains use a soft cloth
dampened with a small quantity of neutral detergent and then wipe dry. Do not use volatile
solvents such as benzene and thinners, as they can damage the surface finish.
Though this camera supports hot plugging, it is recommended that you power down and disconnect
power to the camera before you add or replace system components.
Electrostatic Discharge and the CMOS Sensor
Image sensors and the camera’s housing can be susceptible to damage from severe electrostatic
discharge (ESD). Electrostatic charge introduced to the sensor window surface can induce charge
buildup on the underside of the window. The charge normally dissipates within 24 hours and the
sensor returns to normal operation.
Install & Configure Frame Grabber & Software
Because of the high bandwidth required by these cameras, we recommend a compatible Teledyne
DALSA frame grabbers (
part number (OR-A8S0-FX840 or OR-A8S0-PX870), or equivalent,
described in detail on the teledynedalsa.com site, here. The frame grabber requirements for the 8K
and 16K camera differ. Follow the manufacturer’s installation instructions.
A GenICam compliant XML device description file is embedded with the camera firmware and
allows GenICam compliant applications to recognize the camera’s capabilities once connected.
Installing Sapera LT gives you access to the CamExpert GUI, a GenICam compliant application.
Using Sapera CamExpert
CamExpert is the camera interfacing tool supported by the Sapera library. When used with the
camera, CamExpert allows a user to test all camera operating modes. In addition, CamExpert can
be used to save the camera’s user settings configurations to the camera or to save multiple
configurations as individual camera parameter files on the host system (
*.ccf ). CamExpert can also
be used to upgrade the camera’s software.