Dalsa Linea HS Series, Руководство пользователя

Страница: 62 / 74

62

Appendix A: GenICam Commands
File Access Control Feature Descriptions
Display Name Feature Description View
File Selector FileSelector Selects the file to access. The file types which are accessible are
device-dependent. 1.00
Beginner
All Firmware Upload micro code, FPGA code &XML as a single file to the
camera which will execute on the next camera reboot cycle. DFNC
User Set Use UserSetSelector to specify which user set to access.
User PRNU Use UserSetSelector to specify which user PRNU to access.
User FPN
Current PRNU Use UserSetSelector to specify which user FPN to access.
Accesses the PRNU coefficients that are currently being used by
the camera (not necessarily saved).
CameraData Download camera information and send for customer support.
File Operation
Selector FileOperationSelector Selects the target operation for the selected file in the device.
This operation is executed when the File Operation Execute
feature is called. 1.00
Guru
Open Open Select the Open operation - executed by FileOperationExecute.
Close Close Select the Close operation - executed by FileOperationExecute.
Read Read Select the Read operation - executed by FileOperationExecute.
Write Write Select the Write operation - executed by FileOperationExecute.
File Operation
Execute FileOperationExecute Executes the operation selected by File Operation Selector on
the selected file. 1.00
Guru
File Open Mode FileOpenMode Selects the access mode used to open a file on the device. 1.00
Guru
Read
Write Read
Write Select READ only open mode
Select WRITE only open mode
File Access
Buffer FileAccessBuffer Defines the intermediate access buffer that allows the exchange
of data between the device file storage and the application. 1.00
Guru
File Access
Offset FileAccessOffset Controls the mapping offset between the device file storage and
the file access buffer. 1.00
Guru
File Access
Length FileAccessLength Controls the mapping length between the device file storage and
the file access buffer. 1.00
Guru
File Operation
Status FileOperationStatus Displays the file operation execution status. (RO). 1.00
Guru
Success Success The last file operation has completed successfully.
Invalid Parameter
Write Protect
File Not Open InvalidParameter
WriteProtect
FileNotOpen An invalid parameter was passed to the last feature called.
Attempt to write to a read-only (factory) file.
The file has not been opened yet.
File Too Big FileTooBig The file is larger than expected.
File Invalid FileInvalid The last file operation has completed unsuccessfully because
the selected file is not present in this camera.
File Operation
Result FileOperationResult For Read or Write operations, the number of successfully
read/written bytes is returned. (RO) 1.00
Guru
File Size FileSize Represents the size of the selected file in bytes. 1.00
Guru