![background image](http://html1.mh-extra.com/html/dallmeier/domera-ddz3018-im-hs/domera-ddz3018-im-hs_installation-and-configuration-manual_3347450043.webp)
www.dallmeier.com
43
DDZ30XX-YY/HS/IP
10 Network
10.1
Basic Settings
The network settings of the device can be configured manually or automatically assigned
by a DHCP (Dynamic Host Configuration Protocol) server.
In order to avoid network conflicts, you should clarify if intended network settings are per-
mitted. In particular, the allocation of an already used IP address may result in malfunctions.
Open the
Network settings
via
Network
>
Basic settings ...
.
Fig. 10-1 Network settings and MAC address
Factory Settings
Connection type:
automatic
DHCP:
deactivated
Hostname:
ipcam
IP address:
192.168.2.28
Netmask:
255.255.255.0
Gateway:
192.168.2.1
Allow IP-Finder network configuration: activated
NOTICE
Incorrect settings may result in the device being no longer available via
the network.
For troubleshooting purposes, write down the
MAC
address
and all new
settings before changing the configuration.
Note the explanations below.
Select the transfer rate and the duplex mode from the drop-down list
Connection
type
.
If required, set the
Bandwidth limit
.
The “Connection type > automatic” (Autonegotiation) is suitable for most applications.
Bandwidth limit
Limiting the bandwidth (maximum allowed peak bit rate) can be useful to prevent video
artifacts or frame drops due to packet loss with low bandwidth connections.