![background image](http://html1.mh-extra.com/html/dallmeier/domera-ddz3018-im-hs/domera-ddz3018-im-hs_installation-and-configuration-manual_3347450100.webp)
www.dallmeier.com
100
DDZ30XX-YY/HS/IP
14.3.9.2 View Angle
VIEW ANGLE SETUP
Flip :ON
Tilt Limit : 00
Left Pan Limit :000.0
Right Pan Limit :000.0
Enable Pan Limit :OFF
Apply Auto Pan :OFF
Save and Exit
Flip
ON
: The PTZ dome camera moves up to 180° vertically.
OFF
: The PTZ dome camera only moves up to 90° vertically.
Tilt Limit
Limitation of tilt range
Helpful if ceiling is visible at wide angle settings
-5
° to
+10
°
Pan Limit
If the PTZ dome camera is installed near a wall, the panning range can be limited.
Position the PTZ dome camera under 90° vertically.
Select
Left Pan Limit
.
Click
Iris +
.
Adjust the left pan limit (see section “
Edit Position
” on page 77).
Click
Iris +
.
Select
Right Pan Limit
.
Click
Iris +
.
Adjust the right pan limit (see section “
Edit Position
” on page 77).
Click
Iris +
.
Set
Enable Pan Limit
to
ON
.
Set
Auto Pan
to
ON
to apply the pan limits to the auto pan (endless panning).
Set the pan limit first before setting presets, scans and patterns.
When you enter the pan limit mode, the PTZ dome camera moves to 90° vertically auto-
matically if the PTZ dome camera is positioned over 90° vertically.
When you move over 90° vertically, the display of the pan angle is not being changed.