![background image](http://html1.mh-extra.com/html/dallmeier/domera-ddz3018-im-hs/domera-ddz3018-im-hs_installation-and-configuration-manual_3347450025.webp)
www.dallmeier.com
25
DDZ30XX-YY/HS/IP
7.2
Installation BackPlate
Mark the drill holes on the ceiling using the 3 pre-drilled mounting holes of the BackPlate
(see
Fig. 5-6
on page 16) as a template.
At the marked locations, drill holes fitting for the screws/anchors to be used.
Push anchors suitable for the ceiling material in the drill holes.
Run the required cables suspended from the ceiling through the cable hole of the
BackPlate.
Mount the BackPlate with 3 screws to the ceiling.
Ceiling
Anchor
Mounting screw
Drill hole
Fig. 7-5
Connect the required cables (see section “
Wiring
” on page 26).