DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com
70
The following variables can be used for the
Subject
and the
Message
of the e-mail:
%ALARMTYPE%
Alarm/event type (trigger)
%ALARMHOSTNAME%
Name of the event handler (or alarm host)
%CAMERANAME%
Name of this device
%ALARMTIME%
Date and time the alarm/event is triggered
%DEVICEIP%
IP address of this device
Activate the
Add image as attachment
checkbox to attach the current JPEG image
(captured exactly at the moment the event is triggered) to the e-mail.
Select an encoder from the drop-down list
image source
to define the source of the
JPEG image.
The used encoder must be enabled (“Encoder 2” is disabled by default) and configured
for MJPEG encoding (see section “
Click
test
to check your configuration by sending a test e-mail.
The test was successful if a new e-mail from the device is in your specified e-mail ac
-
count.
Select the
trigger
tab.
Fig. 11-3
Select all relevant triggers which are supposed to be sent out as event messages by
activating the related checkboxes.
Finally, confirm with
oK
.
