dallmeier DDF4510HDV-IM, Руководство по установке и настройке

Страница: 31 / 105

DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com 31

Screw the PG16 cable gland in the appropriate thread of the housing base.

Mount the housing base with 3 screws to the ceiling/wall.
Ceiling/Wall
Drill hole
Anchor
Mounting screw (Ø 4 mm)
Thread for
PG16 cable gland
Housing base
Fig. 6-7

Connect the required cables to the connectors of the camera module
(see Fig. 5-7 and chapter “ Pin Assignment ” on page 96).

If necessary, connect a CVBS monitor to the video preview output ( Fig. 5-6 ).

If PoE (Power over Ethernet) is not available, first connect the camera to a suitable
power supply unit and then connect the power supply unit to the mains socket.

Align the camera with your scene using the 3-axis mount and set the focal length and
focus (loosen the corresponding locking screws before making any adjustments and
tighten them again when finished).

Disconnect the CVBS monitor from the video preview output.

Attach the housing to the housing base and tighten the 3 housing screws ( Fig. 5-5 ) us -
ing a T20 torx wrench.