DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com
62
Select a zone (1 – 4) you would like to define by using the appropriate radio button (op
-
tion button).
Click and hold the left mouse button and draw a rectangle (going from upper left to
lower right) over the relevant image area you would like to hide (mask) in the camera.
The selected image area is indicated in red.
If the selected image area does not meet your requirements, use the mouse and click
on an unmasked area.
The red masking is then removed and a new image area can be selected.
If the selected image area meets your requirements, activate the defined zone by se
-
lecting the appropriate checkbox.
Click
oK
to apply the settings.
If you want to define another image area as a Privacy Zone, select the appropriate
radio button and proceed as described above.
However, if the combined area of all already activated zones amounts to more than
10% of the entire image, you cannot mask any more zones.
In that case, reduce the size of the already defined zones and save the settings again
by clicking
oK
. Then, define the new zone.
Finally, click
oK
in order to save all settings.
You should always activate and save each defined zone first (“OK”) before defining an
-
other zone.
In order to display masked image areas again, deactivate the appropriate checkbox and
click “OK”. The defined image area remains saved in the camera as long as you do not
click into an unmasked image area within the corresponding zone. Thus, you can always
activate or deactivate the masking for an already defined image area.
